Bộ chuyển đổi RS-232/422/485 sang quang Single-Mode 15 km SC ICP DAS I-2542-A

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

I-2542-A CR RS-232/422/485 to Single-Mode 15 Km, SC Fiber optic converter, TX 1310 nm, RX 1550 nm (RoHS)

Gọi 0904251826 để được trợ giúp

Bộ chuyển đổi RS-232/422/485 sang quang Single-Mode 15 km SC ICP DAS I-2542-A

Features

  • Automatic RS-485 Direction Control
  • Optical fibers enable transmission of 2 km for I-2541 ,15 km for
    I-2542-A/I-2542-B and 25 km for I-2542-A25/I-2542-B25
  • Avoids lightning strikes and EMI/RFI interference
  • Supports +10 VDC ~ +30 VDC
  • ESD Protection for the RS-232/422/485 Data Line
  • DIN-Rail Mounting
  • Supports operating temperatures from -25 °C ~ +75 °C

Introduction

The I-2541 is an RS-232/422/485 to fiber optic converter that secures data transmission by using fiber optic transmission to provide immunity from EMI/RFI interference. The I-2541 is used for RS-232/422 point-to-point connections and RS-485 multi-drop applications for transmitting a signal up to 2 km and is the perfect solution for applications where transmission must be protected from electrical exposure, surges or chemical corrosion.

The I-2542 series of Single-Strand Fiber Converters supports Wavelength Division Multiplexing (WDM) technology that allows two independent data communication channels to transmit and receive over one standard, single mode, fiber optic line. This not only doubles your existing bandwidth, but also effectively reduces the cost of creating a new fiber optic infrastructure.

Specification

Models I-2541 I-2542 series
Interface
Fiber Interface Fiber Port Multi Mode; ST connector Single-Mode; SC connector
Wavelength 850 nm TX: 1310, RX: 1550 nm for I-2542-A/I-2542-A25
TX: 1550, RX: 1310 nm for I-2542-B/I-2542-B25
Fiber Cable 50/125, 62.5/125, 100/140 μm 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance 2 km, (62.5/125 μm recommended) 15 km for I-2542-A/I-2542-B
25 km for I-2542-A25/I-2542-B25
(9/125 μm recommended)
Serial Interface RS-232 The RS-232, RS-422 and RS-485 cannot be used simultaneously TxD, RxD, GND
RS-422 TxD+, TxD-, RxD+, RxD-
RS-485 Data+, Data-
RS-422/485 Transmission Distance Max. 1,200 m at 9.6 kbps; Max. 400 m at 115.2 kbps
(Belden 9841 2P twisted-pair cable, if different cables are used, the transmission distance may change)
Self-Tuner Asic Inside Yes Fixed baud rate setting via rotary switch
Speed 300 ~ 115200 bps 1200 ~ 115200 bps
ESD Protection Yes
RS-232/422/485 Connector Removable 8-Pin Terminal Block
LED Indicators
Power Yes
Power
Input Voltage Range +10 VDC ~ +30 VDC (Non-isolated)
Power Consumption 1.5 W 2 W
Mechanical
Casing Plastic
Flammability Fire-Retardant Materials (UL94-V0 Level)
Dimensions (W x L x H) 33 mm x 89 mm x 107 mm
Installation DIN-Rail Mounting
Environment
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +75 °C
Humidity 10 ~ 90% RH, non-condensing

Important Note: You must purchase both I-2542-A and I-2542-B or I-2542-A25 and I-2542-B25 since these products work as a pair.

Download

Manual 2541

Manual 2542

Data Sheets

FAQ

Certification

Odering information

I-2541 CR RS-232/422/485 to Mulit-Mode 2 Km, ST Fiber optic converter (RoHS)
I-2542-A CR RS-232/422/485 to Single-Mode 15 Km, SC Fiber optic converter, TX 1310 nm, RX 1550 nm (RoHS)
I-2542-B CR RS-232/422/485 to Single-Mode 15 Km, SC Fiber optic converter, TX 1550 nm, RX 1310 nm (RoHS)
I-2542-A25 CR RS-232/422/485 to Single-Mode 25 Km, SC Fiber optic converter, TX 1310 nm, RX 1550 nm (RoHS)
I-2542-B25 CR RS-232/422/485 to Single-Mode 25 Km, SC Fiber optic converter, TX 1550 nm, RX 1310 nm (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: