Switch công nghiệp 4 cổng CAN Bus ICP DAS I-2534

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

I-2534 CR Industrial 4-port CAN bus Switch

Gọi 0904251826 để được trợ giúp

Switch công nghiệp 4 cổng CAN Bus ICP DAS I-2534

The I-2534 / I-5534-M is one kind of CAN bus switch. There are four independent CAN channels which offer a flexible design of the start or tree network topology. This new topology could resolve the complex CAN bus application, like industrial machinery, building automation, vehicle automation, and etc. Furthermore the I-2534 / I-5534-M integrates and exchanges data between different CAN network which has different baud rate. It helps users to extend the CAN network system. The I-2534 / I-5534-M could increase the maximum CAN node count in a CAN network by splitting the CAN network into several subnets. In additional, the user-defined CAN baud rate and CAN filter configuration are also supported.

Applications

  • Control System

  • Building Automation

  • Factory Automation

  • Distributed data acquisition

Features

  • 4 CAN communication ports

  • Compatible with CAN specification 2.0A and 2.0B

  • Fully compatible with the ISO 11898-2 standard

  • Baud rate : 5 k, 10 k, 20 k, 33.3 k, 50 k, 62.5 k, 83.3 k, 125 k, 250 k, 500 k, 800 k, 1 M bps and user-defined

  • CAN bus filter is configurable

  • 100 data frames buffer for each CAN channel

  • Max data flow up to 2500 fps for all CAN channel

  • Selectable baud rate by rotary switch

  • Selectable 120Ω terminator resistor by DIP switch

  • LED for CAN reception and transmission

  • Support CAN network with star or tree topology

  • Extending the CAN bus distance to expand the CAN network size

  • Integrating different CAN network with different baud rate

  • I-2534 is casing with Flame-Resistant plastic case

  • I-5534-M is casing with Aluminum metallic case

  • Utility tool for CAN filter, route path, user-defined baud rate and  CAN-ID mapping (v1.10 firmware) configuration

  • Max. CAN-ID mapping data up to 32 for each CAN channel. (v1.10 firmware)

Network Deployment

 

 

 

Hardware Specifications

Model Name

I-2534

I-5534-M

Hardware
Controller

High Performance Microcontroller

RTC (Real Time Clock)

No

Watchdog

Watchdog IC

CAN Interface
Transceiver

NXP TJA1042

Channel number

4

CAN Connector

3-pin screwed terminal block with CAN_H, CAN_L, CAN_GND

9-pin male D-Sub with CAN_GND, CAN_SHLD, CAN_H, CAN_L

CAN Specification

ISO-11898-2, CAN 2.0A and CAN 2.0B

Baud Rate (bps)

5k, 10 k, 20 k, 33.3 k, 50 k, 62.5 k, 83.3 k, 125 k, 250 k, 500 k, 800 k, 1 M bps and user-defined

Baud Rate Selection

Selectable by rotary switch

Isolation

3000 VDC for DC-to-DC, 2500 Vrms for photo-couple

Terminator Resistor
Selectable 120Ω terminator resistor by DIP switch

Selectable 120Ω terminator resistor by internal jump

Transmission Distance (m)

Depend on baud rate (for example, max. 1000 m at 50 kbps )

CAN Filter

Configurable by user

Propagation Delay

240 us ~ 1360 us *note1

UART Interface
RS-232

1 port (for configuration)

RS-232 Connector
3-pin screwed terminal block (TxD, RxD, GND )

9-pin screwed terminal block (TxD, RxD, GND )

LED
Round LED

CAN status LED x 4 , Power LED x 1

Power
Input range

Unregulated +10 ~ +30 VDC

Power Consumption

3W

1.5W

Mechanism
Installation

DIN-Rail

Wall-Mounting

Casing

Flame-Resistant plastic case

Aluminum metallic case

Dimensions

32.3 mm x 99 mm x 77.5 mm (W x L x H)

116.5 x 127 x 61.3 mm (W x L x H)

Environment
Operating Temp.

-25 ~ 75 ℃

Storage Temp.

-30 ~ 80 ℃

Humidity

10 ~ 90% RH, non-condensing

ESD protection

4 kV Contact for each channel

EFT protection

500V for signal, 1000V for power

EMI certification

30M ~ 1G pass

Hi-pot protection

1kV pass

Surge protection

500V pass

1kV pass

note1:
The propagation delay depends on the CAN Bus baud rate and the CAN message format. 
The minimum delay is [ 11-bit ID and 8-byte data @ 1M bps ] 
The maximum delay is [ 29-bit ID and 8-byte data @ 5k bps ]

Download

Pin

I/O Structure

Manual

Software

Data sheet I-2534

Data Sheet I-5534-M

Certification

FAQ

Ordering Information

 

I-2534 CR

Industrial 4-port CAN bus Switch

I-5534-M

Industrial 4-port CAN bus Switch with Metal casing

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: