Module nhận tín hiệu vị trí GPS + 1 kênh đầu ra số + 1 kênh đầu ra PPS kết nối RS-232 NMEA + RS-485 DCON ICP DAS GPS-721

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

GPS-721 CR GPS Receiver and 1 DO, 1 PPS Output Module (RoHS) includes a 3 m GPS Active External Antenna (ANT-115-03)

Gọi 0904251826 để được trợ giúp

Module nhận tín hiệu vị trí GPS + 1 kênh đầu ra số + 1 kênh đầu ra PPS kết nối RS-232 NMEA + RS-485 DCON ICP DAS GPS-721

Features

  • Support 32-channel GPS and NMEA v0183 v3.01 (Baudrate 9600 bps)

  • Baudrate 9600 bps

  • RS-485 supports DCON protocol

  • RS-232 supports NMEA v0183 v3.01 format or DCON protocol

  • Built-in 1 channel DO, 1 channel PPS(1 pulse per second), 1 RS-485 port, 1 RS-232 port

  • PPS: 100 ms pulse output/sec for precise timekeeping and time measurement

  • 10 ~ 30 VDC – (Power reverse polarity protection)

  • With various system LED indicators

  • DIN Rail design

Introduction

The GPS-721, a new GPS solution for Remote GPS Receiver module in ICP DAS, featuring high sensitivity, low power consumption and ultra small form factor with DCON and GPS protocols. This powerful item provides you with superior sensitivity and outstanding performance even in the harshest environment.The GPS-721 provides extra 1 channel DO and 1 channel PPS for users PPS signals can be used for precise timekeeping and time measurement. One can combine the PPS functionality with another as time synchronization source.

Therefore, the GPS-721 can be a powerful GPS remote module as well as a general purpose GPS module with RS232 interface. It can also be applied in Automotive navigation, Personal positioning and navigation, Marine navigation, Satellite time correction and etc…

Application

  • Automotive navigation

  • Personal positioning and navigation

  • Marine navigation

  • Satellite time correction

  • Precise timekeeping and time measurement

Hardware Specification

Digital Output

Output Channel

1 (Sink)

Output Type

Non-isolated Open Collector

Output Current

100 mA

Load Voltage

+5 VDC~ +30 VDC

GPS Receiver

Chip

MediaTek solution

Frequency

L1 1575.42 MHz, C/A code

Support Channel

66

Position Accuracy

Autonomous

(2D RMS)

SBAS

2.5m (depends on accuracy of correction data)

Max. Altitude

<18,000 m

Max. Velocity

<515 m/s

Acquisition Time

Cold Start (Open Sky) = 33 s (typical)

Sensitivity

Tracking

Up to -165 dBm

Cold start

Up to -148 dBm

Protocol Support

NMEA 0183 version 3.01 (Baudrate 9600 bps)

GPS Output

1 PPS

Pulse per second output (Default 100 ms pulse/sec)

RS-232 Interface

GPS information output

LED Indicators

Power/Communication

1 LED

GPS

3 LEDs

Power

Protection

Power reverse polarity protection

Frame Ground Protection

Yes

Required Supply Voltage

+10 VDC ~ +30 VDC (non-regulated)

Power Consumption

2.5 W

Mechanical

Dimensions (W x H x D)

72 mm x 117 mm x 35 mm

Weight

200 g

Housing

Plastic

Environmental

Operating Temperature

-25 °C ~ +75 °C

Storage Temperature

-40 °C ~ +80 °C

Humidity

5 ~ 95% RH, non-condensing

Download

Manual

Datasheet

Software

Certification

Ordering Information

GPS-721 CR

GPS Receiver and 1 DO, 1 PPS Output Module (RoHS)
includes a 3 m GPS Active External Antenna (ANT-115-03)

Accessories

ANT-115-03 CR

GPS Active External Antenna (SMA Plug) (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: