FR-2054T 8-channel isolated digital output and 8-channel isolated digital input module

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ
8-channel FRNet Isolated Digital Input and 8-channel Isolated Digital Output Module
Gọi 0904251826 để được trợ giúp

FR-2054T 8-channel isolated digital output and 8-channel isolated digital input module

 

 

Features

The FR-2054T module provides 8 Isolated Sink Type Digital Outputs and 8 Isolated Sink/Source Digital Inputs. The I/O data transmission is controlled by the FRnet control chip developed by ICPDAS. FRnet was designed to provide deterministic high speed network communication. The communication mechanism is dominated by the token-stream, which is generated by the network manager located at a specific node (SA0). This manager provides for fixed scan-time and I/O synchronization capabilities without the need of any special communication protocol.

Special anti-noise circuitry has also been built into the FRnet control chip to ensure communication reliability. This distributive digital output module must be connected to other modules or a host controller with a network manger built in.

  • Built-in Wire-saving FRnet DI/DO control
  • High-speed transmission reliability
  • Simple synchronization mechanism
  • No software overhead on protocol processing
  • Supporting broadcasting (1:n data transmission)
  • Duplicating output easily
  • Fixed I/O scan-time and I/O synchronization
  • DIN-Rail 

    Specifications

    Digital Output
    Output Channel 8
    Output Type Sink, Open-Collector (NPN)
    Load Voltage 30 VDC, Max.
    Load Current 250mA, Max.
    Isolation Voltage 3750 Vrms
    Digital Input
    Input Channel 8 (Sink/Source)
    Input Type Isolation, One Common for All Digital Inputs
    On Voltage Level +19 VDC ~ 30 VDC
    Off Voltage Level +11 VDC max
    Input Impedance 3.3 kOhm
    Isolation Voltage 3750 Vrms
    Interface
    2-wire cabling 2-wire cabling Belden 9841 (2P twisted-pair cable),
    When different cables are used, the transmission distance may change
    Transfer distance Max. 400m for speed 250Kbps
    Max. 100m for speed 1Mbps(Default)
    LED Indicators Power, Communication Run, Communication Error, Terminal
    resistor, Digital input/output
    Transfer speed 250Kbps and 1Mbps(Default)
    DIP Switch Settings
    Cyclic scan time 2.88ms for speed 250Kbps
    0.72ms for speed 1Mbps(Default)
    Connection Removable 20-pin Terminal Block
    Power
    Input Voltage Range +10 ~ +30 VDC (Non-isolation)
    Power consumption 2W Max
    Protection Power reverse polarity protection
    Frame Ground for EMS Protection Yes
    Connection 5-Pin Removable Terminal Block
    Mechanical
    Casing Plastic (Flammability UL 94V-0)
    Dimensions (W x L x H) 33 mm x 102 mm x 110 mm
    Installation DIN-Rail
    Mechanical
    Operating Temperature -25°C ~ +75°C
    Storage Temperature -30°C ~ +85°C
    Ambient Relative Humidity 10% ~ 90% RH, non-condensing

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: