Tổng tiền thanh toán:
Sản phẩm đã được thêm vào giỏ hàng
F7334 GPS+EDGE WIFI Router
F7334 GPS+EDGE WIFI ROUTER
F7334 GPS+EDGE WIFI ROUTER is a kind of cellular terminal device that provides data transfer function by public EDGE network and GPS function.
It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422), Ethernet and WIFI port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial, Ethernet and WIFI devices with only basic configuration. Also, it supports GPS function.
It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.
Design for Industrial Application
1. High-powered industrial cellular module
2. High-powered industrial 32bits CPU
3. High-powered industrial GPS module
4. Support low-consumption mode, including sleep mode, scheduled online/offline mode, scheduled power-on/power-off mode(optional)
5. Housing: iron, providing IP30 protection
6. Power range: DC 5~35V
Stability and Reliability
1. Support hardware and software WDT
2. Support auto recovery mechanism, including online detect, auto redial when offline to make router always online
3. Ethernet port: 1.5KV magnetic isolation protection
4. RS232/RS485/RS422 port: 15KV ESD protection
5. SIM/UIM port: 15KV ESD protection
6. Power port: reverse-voltage and overvoltage protection
7. Antenna port: lightning protection(optional)
Standard and Convenience
1. Support standard RS232(or RS485/RS422), Ethernet and WIFI port that can connect to serial, Ethernet and WIFI devices directly
2. Support standard WAN port and PPPOE protocol that can connect to ADSL directly
3. Support intellectual mode, enter into communication state automatically when powered
4. Provide management software for remote management
5. Support several work modes
6. Convenient configuration and maintenance interface（WEB or CLI）
1. Support multiple WAN access methods, including static ip, DHCP, L2TP, PPTP,PPPOE,3G/HSPA/4G.
2. Support GPS function
3. Support double link backup between EDGE and WAN(PPPOE, ADSL) (optional)
4. Support VPN client(PPTP, L2TP, OPENVPN, IPSEC and GRE)(only for VPN version)
5. Support VPN server(PPTP, L2TP, OPENVPN, IPSEC and GRE)(only for VPN version)
6. Support local and remote firmware upgrade,import and export configure file.
7. Support NTP, RTC embedded.
8. Support mulitiple DDNS provider service.
9. Support VLANs, MAC Address clone, PPPoE Server
10. WIFI support 802.11b/g/n. support AP, client, Adhoc, Repeater, Repeater Bridge and WDS(optional) mode.
11. WIFI support WEP,WPA,WPA2 encryption,Support RADIUS authentication and MAC address filter.
12. Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout
13. Support APN/VPDN
14. Support DHCP server and client, firewall, NAT, DMZ host , URL block, QoS, ttraff,statistics, real time link speed statistics etc.
15. Full protocol support , such as TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP, SSHD, etc.
16. Schedule Reboot, Schedule Online and Offline,etc.