Module 6 kênh đầu ra relay + 6 kênh đầu vào số kết nối 2 cổng Ethernet Modbus TCP/IP ICP DAS ET-2260

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

ET-2260 CR Ethernet I/O Module with 2-port Ethernet Switch, 6-ch Relay Output and 6-ch DI (RoHS)

Gọi 0904251826 để được trợ giúp

Module 6 kênh đầu ra relay + 6 kênh đầu vào số kết nối 2 cổng Ethernet Modbus TCP/IP ICP DAS ET-2260

Features

  • Built-in Web Server
  • Support Modbus TCP/UDP Protocols
  • Powerful 32-bit MCU Handles Efficient Network Traffic
  • 2-port Ethernet Switch (LAN Bypass) for Daisy-Chain Wiring
  • Dual Watchdog
  • I/O Pair Connection (Push and Polling)
  • Supports web configuration and firmware update via Ethernet
  • Built-in I/O
    • DI/Counter: 6 channels
    • Power Relay: 6 channels
  • LED Display to Indicate the I/O status
  • Wide Operating Temperature Range: -25 ~ +75 °C

Introduction

Providing various digital I/O functions, the ET-2260 module is an IP-based Ethernet I/O monitoring and control module. The module can be remotely controlled through a 10/100 M Ethernet network by using Modbus TCP/UDP protocol. Modbus has become a de facto standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices. This makes the ET-2260 module perfect integration with the HMI, SCADA, PLC and other software systems.

The ET-2260 provides 6 wet contact Digital Input channels and 6 Form A electromechanical Relays. With 2 Ethernet ports, the ET-2260 allows daisy chain connection which permits the flexibility in locating devices, eases installation and lowers infrastructure costs. It features 8 kV ESD protection, 4 kV EFT protection, 3 kV surge and 3750 VDC I/O isolation are also provided to enhance noise protection capabilities in industrial environments. Each input channel can be used as a 32-bit counter. The power-on value and safe value of relay are configurable.

The module can be used to create DI to DO pair-connect through the Ethernet. After configuration, the ET-2260 module can poll the status of the local DI channels and then use the Modbus/TCP protocol to continuously write to the remote DO devices.

It is equipped with removable terminal block connector for easy and robust wiring in industrial situations, and features a powerful 32-bit ARM MCU to handle efficient network trafficking.

Application

  • Factory, Building and Home Automation
  • Remote Maintenance

System Specification

System
CPU 32-bit ARM
Communication
Ethernet Port 2 x RJ-45, 10/100 Base-Tx, Switch Ports
Protocol Modbus TCP, Modbus UDP
Security Password and IP Filter
I/O Pair Connection Yes (Push, Polling)
Dual Watchdog Yes, Module, Communication (Programmable)
LAN Bypass Yes
LED Indicators
For System Running Yes
For Ethernet Link/Ack Yes
For DI/DO status Yes
2-way Isolation
Ethernet 1500 VDC
I/O 3750 VDC
EMS Protection
ESD (IEC 61000-4-2) ±8 kV Contact for Each Terminal and ±16 kV Air for Random Point
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±3 kV for Power Line
Power Requirements
Reverse Polarity Protection Yes
Powered from Terminal Block +10 ~ +30 VDC
Consumption 3.3 W (Max.)
Mechanical
Dimensions (L x W x H) 127 mm x 33 mm x 99 mm
Installation DIN-Rail or Wall mounting
Environmental
Operating Temperature -25 ~ +75°C
Storage Temperature -30 ~ +80°C
Humidity 10 ~ 90% RH, Non-condensing

I/O Specification

Digital Input/Counter
Channels 6
Contact Wet Contact
Sink/Source (NPN/PNP) Sink/Source
On Voltage Level +5 VDC ~ +50 VDC
Off Voltage Level + 1 VDC Max.
Input Impedance 7.5 kΩ
Counters Max. Count 4,294,967,295 (32 bits)
Max. Input Frequency 3 kHz
Programmable Digital Filter 1 ~ 6500 ms (0.08 Hz ~ 500 Hz)
Overvoltage Protection +70 VDC
Power Relay
Channels 6
Type Power Relay, Form A (SPST N.O.)
Contact Rating 5 A @ 250 VAC/24 VDC (Resistive Load)
Min. Contact Load 10 mA @ 5 V
Operate Time 10 ms (max.)
Release Time 5 ms (max.)
Mechanical Endurance 2 × 107 ops.
Electrical Endurance 105 ops.
Power-On Value Yes, Configurable
Safe Value Yes, Configurable

Download

Manual

Data sheet

Software

Odering information

ET-2260 CR Ethernet I/O Module with 2-port Ethernet Switch, 6-ch Relay Output and 6-ch DI (RoHS)

 

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: