Module 16 kênh đầu vào/ra số kết nối 2 cổng Ethernet Modbus TCP/IP ICP DAS ET-2254

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

ET-2254 CR Ethernet I/O Module with 2-port Ethernet Switch, 16-ch Universal DIO (DO Max. Load Current: 100 mA) (RoHS)

ET-2254P CR Ethernet I/O Module with 2-port Ethernet Switch, 16-ch Universal DIO (DO Max. Load Current: 350 mA) (RoHS)

Gọi 0904251826 để được trợ giúp

Module 16 kênh đầu vào/ra số kết nối 2 cổng Ethernet Modbus TCP/IP ICP DAS ET-2254

Features

  • Built-in Web Server
  • Support Modbus TCP/UDP Protocols
  • Powerful 32-bit MCU Handles Efficient Network Traffic
  • 2-port Ethernet Switch (LAN Bypass) for Daisy-Chain Wiring
  • Dual Watchdog
  • I/O Pair Connection (Push and Polling)
  • Supports web configuration and firmware update via Ethernet
  • 16 channels of Universal DIO
  • Provide Digital Output Maximum Load Current:
    • ET-2254: 100 mA/Channel
    • ET-2254P: 350 mA/Channel
  • LED Display to Indicate the I/O status
  • Bi-direction Universal DIO Ports under software control
  • Wide Operating Temperature Range: -25 ~ +75 °C

Introduction

Providing a variety of digital I/O functions, the ET-2254(P) module is an IP-based Ethernet I/O monitoring and control module. The module can be remotely controlled through a 10/100 M Ethernet network by using Modbus TCP/UDP protocol. Modbus has become a de facto standard communications protocol in industrial applications, and is now the most commonly available means of connecting industrial electronic devices. This makes the ET-2254(P) module being perfectly integrated with the HMI, SCADA, PLC or other software systems.

The ET-2254(P) provides 16-channel Universal DIO. Each I/O port can be configured as DI or DO port. The ET-2254 provides Digital Output channel can drive 100 mA load, while the ET-2254P provides Digital Output channel can drive 400 mA load. There are configurable power-on and safe values for Digital Output. With 2 Ethernet ports, the ET-2254(P) allows daisy chain connection which enables flexibility in locating devices; easy installation and lower infrastructure costs. It features 8 kV ESD protection, 4 kV EFT protection, 3 kV surge and 3750 VDC I/O isolation to enhance noise protection capabilities in industrial environments. 

The module can be used to create DI to DO pair-connect through the Ethernet. After configuration, the ET-2254(P) module can continuously poll the status of the local DI channels and then write to the remote DO devices via the Modbus/TCP protocol.

It is equipped with removable terminal block connector for easy and robust wiring in industrial applications, and features a powerful 32-bit ARM MCU to handle efficient network trafficking.

Application

  • Factory, Building and Home Automation
  • Remote Maintenance

System Specification

System
CPU 32-bit ARM
Communication
Ethernet Port 2 x RJ-45, 10/100 Base-Tx, Switch Ports
Protocol Modbus TCP, Modbus UDP
Security Password and IP Filter
I/O Pair Connection Yes (Push, Polling)
Dual Watchdog Yes, Module, Communication (Programmable)
LAN Bypass Yes
LED Indicators
For System Running Yes
For Ethernet Link/Ack Yes
For DI/DO status Yes
2-way Isolation
Ethernet 1500 VDC
I/O 3750 VDC
EMS Protection
ESD (IEC 61000-4-2) ±8 kV Contact for Each Terminal and ±16 kV Air for Random Point
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±3 kV for Power Line
Power Requirements
Reverse Polarity Protection Yes
Powered from Terminal Block +10 ~ +30 VDC
Consumption 3.3 W (Max.)
Mechanical
Dimensions (L x W x H) 127 mm x 33 mm x 99 mm
Installation DIN-Rail or Wall mounting
Environmental
Operating Temperature -25 ~ +75°C
Storage Temperature -30 ~ +80°C
Humidity 10 ~ 90% RH, Non-condensing

I/O Specification

Model ET-2254 ET-2254P
I/O Type By Wire Connection, Configurable Universal DIO
I/O Channels 16
Digital Input
Type Dry Contact
Sink/Source (NPN/PNP) Source
On Voltage Level Close to GND
Off Voltage Level Open
Input Impedance 3 kΩ, 0.5 W 7.5 kΩ, 1 W
Counters Max. Count 4,294,967,295 (32-bit)
Max. Input Frequency 3 kHz 2.5 kHz
Programmable Digital Filter 1 ~ 6500 ms (0.08 Hz ~ 500 Hz)
Digital Output
Type Open-collector (Sink)
Sink/Source (NPN/PNP) Sink
Max. Load Current 100 mA/channel 350 mA/channel
Load Voltage +5 VDC to +30 VDC +5 VDC to +50 VDC
Short Circuit Protection - Yes
Power-on Value Yes, Configurable
Safe Value Yes, Configurable

Download

Manual

Data sheet

Software

Odering information

ET-2254 CR Ethernet I/O Module with 2-port Ethernet Switch, 16-ch Universal DIO (DO Max. Load Current: 100 mA) (RoHS)
ET-2254P CR Ethernet I/O Module with 2-port Ethernet Switch, 16-ch Universal DIO (DO Max. Load Current: 350 mA) (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: