EIP-2019/S CR: Module EtherNet/IP 8 kênh đầu vào tương tự +cặp nhiệt (Thermocouple)

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

EIP-2019/S CR EtherNet/IP Module (Isolated 8-ch Universal Analog Input), with CN-1824 Daughter Board (RoHS)

Gọi +84 904251826 để được trợ giúp

EIP-2019/S CR: Module EtherNet/IP 8 kênh đầu vào tương tự +cặp nhiệt (Thermocouple)

Features

• Transfer protocol: EtherNet/IP
• Powerful 32-bit MCU handles efficient network traffic
• 10/100 Base-TX Ethernet, RJ-45 x 2 (Auto-negotiating, auto MDI/MDIX, LED Indicators)
• Support ARP,TCP, UDP, ICMP, DHCP, BOOTP and TFTP protocols
• Easy firmware update via Ethernet
• Removable terminal block connector
• LED display to indicate the I/O status
• 8-ch analog Inputs
• Internal resistors (125Ω) selectable
• Support cold-junction compensation(CJC)
• RoHS compliant

Introduction

The EIP-2000 is an industrial remote I/O module series supporting the EtherNet/IP protocol. Users can seamlessly integrate these modules into the Ethernet network from the industrial floor to the enterprise. The EIP-2000 allows daisy chain connection which permits the flexibility in locating devices, eases installation and lowers infrastructure costs. All the modules can be deployed in the network topologies such as star, line or ring. The isolation design protects the EIP-2000 against the harmful interference. The EIP-2019 is an 8-ch remote analog input module. It supports not only voltage and current(internal resistors selectable) input type but also thermocouple type with B,C,E,J,K,N,R,S,T. There is an automatically cold-junction compensation (CJC) for each channel. The accuracy of the measurement is smaller than 0.1% FSR. The Module is designed as an EtherNet/IP adapter. Users can obtain the input status as well as the connection status of the EIP-2019 by the LEDs indication. In addition, ICPDAS provides software utility to easily configure and test the EIP-2000 modules via Ethernet.

Specification

Analog Input
Channels 8-ch Thermocouple Analog Input
Type Voltage:±15 mV, ±50 mV, ±100 mV, ±150 mV, ±500 mV, ±1 V, ±2.5 V, ±5 V, ±10 V
Thermocouple :B,C,E,J,K,N,R,S,T
Current : ±20 mA (Jumper Selectable)
Resolution 16 bits
Accuracy +/-0.1% (1 channel)
Sampling Rate 10 samples/ second (1 channel)
Input Impedance Voltage Input: >400 kΩ, Current Input: 125 Ω
Overvoltage Protection 240 Vrms
Individual Channel Configuration Yes
Open Wire Detection Yes
Zero Drift +/-20uV/°C
Span Drift +/-25ppm/°C
Intra-module Isolation 3000 VDC

 

Ethernet
Ports 10/100 Base-TX, 8-pin RJ-45 x 2
Support daisy chain connection.

 

EtherNet/IP
Standard IEEE 802.3 Ethernet/IP

 

Power
Consumption 3.8W

 

Mechanical
Dimensions (mm) 110 x 90 x 33 (H x W x D)
Installation DIN-Rail

 

Environmental
Operating Temperature -25℃ ~ +75℃
Storage Temperature -30℃ ~ +80℃

Download

Data sheet

Documents

Ordering information

EIP-2019/S     CR  EtherNet/IP Module (Isolated 8-ch Universal Analog Input), with CN-1824 Daughter Board (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: