Board kết nối cho module đầu vào HART Analog F-8017CH ICP DAS DN-AIH-08

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

Termination board for HART analog input with EMS protection and over-current protected and isolated passive loop power. It’s for use with iDCS-8000 DCS Redundant I/O Racks and Cartridge I/O modules.

Gọi 0904251826 để được trợ giúp

Board kết nối cho module đầu vào HART Analog F-8017CH ICP DAS DN-AIH-08

Features

The DN-AIH-08 is a termination board for HART analog input module. This termination board not only measures analog signal but also provides isolated power source for the field devices. In other words, this board supports both active and passive loop. Besides, thie board also has short circuit protection for the isolated power, the loop current will be limited when circuit is shorted or the current is too large. Moreover, the removable fuse can protect loop device when high inrush current occur, these fuses also have physical indicator when broken. It’s for use with iDCS-8000 DCS Redundant I/O Racks and Cartridge I/O modules.

PIN Assignments

Wiring

Specifications

 

 

Analog Input

Channel

8 (Support Active and Passive Loop Wiring Connection))

Isolated Power Rating

1W with current limited protection

Fuse

320 mA removable and physical indicator fuse

General

Dimensions (W x L x H)

135 x 214.6 x 25.5 mm

Mounting

35 mm DIN Rail, Wall

Operating temperature

-25 ~ +75 °C

Humidity

5 ~ 95 % RH, Non-condensing

 

Reference & Support

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: