Bộ sạc Ắc quy 12 VDC cho trạm quan trắc Campbell Scientific CH150

Thương hiệu: Campbell Scientific | Tình trạng: Còn hàng
Liên hệ

CH150 12 V Charging Regulator

Gọi 0904251826 để được trợ giúp

Bộ sạc Ắc quy 12 VDC cho trạm quan trắc Campbell Scientific CH150

Overview

The CH150 is a charging regulator for an external rechargeable 12 V VRLA (valve-regulated lead-acid) battery, such as the BP12 or BP24 offered by Campbell Scientific. Charging power for the CH150 is typically supplied by an unregulated solar panel, AC/AC transformer, or AC/DC converter. The CH150 provides charging with temperature compensation for optimal charging and battery life. A maximum power point tracking algorithm is incorporated for solar inputs to maximize available solar charging resources.

Benefits and Features

  • Protects against high-amperage and high-voltage damage to power supply

  • Battery reversal protection

  • Allows simultaneous connection of two charging sources (e.g., solar panel, ac wall charger)

  • ETL listed Class 2 power supply

Detailed Description

The CH150 is a micro-controller-based smart charger with temperature compensation that optimizes battery charging and increases the battery's life. Two input terminals enable simultaneous connection of two charging sources. They also incorporate a maximum power point tracking algorithm for solar inputs that maximizes available solar charging resources.

The CH150 has several safety features intended to protect the charging source, battery, charger, and load devices. Battery-reversal protection is included, as well as ESD and surge protection on all of the CH150 inputs and outputs.

The CH150 replaced the CH100.

Specifications

Operational Temperature

-40° to +60°C (VRLA battery manufacturers state that “heat kills batteries” and recommend operating batteries at ≤ 50°C.)

Dimensions

7.5 x 3.7 x 10.0 cm (3 x 1.5 x 3.9 in.)

CHARGE - CHARGE Terminals (AC or DC Source)

AC

18 to 24 VRMS (internally limited to 1.2 ARMS)

DC

16 to 40 Vdc (internally limited to 0.85 Adc)

SOLAR Terminals (Solar Panel or Other DC Source)

-NOTE-

Battery voltages below 8.7 V may result in < 3.0 A current limit because of fold-back current limit.

Input Voltage Range

15 to 40 Vdc

Maximum Charging Current

4.0 Adc typical (3.2 to 4.9 Adc depending upon individual charger)

Quiescent Current

No Charge Source Present

160 μA at 13.7 Vdc

No Battery Connected

930 μA at 30 volt input voltage (ac or dc)

Battery Charging

FLOAT Charging

Vbatt(T) = 13.65 V - (24 mV) x (T - 25) + (0.24 mV) x (T - 25)2

Accuracy

±1% (on charging voltage over -40° to +60°C)

Power Out (+12 Terminals)

Voltage

Unregulated 12 V from battery (4.65 A solid-state circuit breaker)

Standards

ETL Listed Class 2 power supply

Download

Brochures

PS150 and CH150 Power Supply and Charge Controller

Power Supply Overview

Manuals

PS150/CH150 12 V Charging Regulators

Technical Papers

Power Supplies (5-F)

Compliance

CH150/PS150 EU Declaration of Conformity

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: