Module CompactFlash mở rộng bộ nhớ cho Datalogger Campbell Scientific CFM100

Thương hiệu: Campbell Scientific | Tình trạng: Còn hàng
Liên hệ

CFM100 CompactFlash Module

Gọi 0904251826 để được trợ giúp

Module CompactFlash mở rộng bộ nhớ cho Datalogger Campbell Scientific CFM100


The CFM100 stores the datalogger's data on a removable CompactFlash (CF) card. The CFM100/CF card combination can be used to expand the datalogger's memory, transport data/programs from the field site(s) to the office, and upload power up functions. The module connects to the 40-pin peripheral port on a CR1000 or CR3000 datalogger.

Benefits and Features

  • Used to expand data storage of our CR1000 and CR3000 dataloggers

  • Connects to the datalogger's peripheral port

  • Small, light-weight CF cards fit in your pocket for easy transport between the datalogger and PC

Detailed Description

The CFM100 includes a card slot that can fit one Type I or Type II CF card. Only industrial-grade CF cards should be used with our products. Although consumer-grade cards cost less than industrial-grade cards, the consumer-grade cards are more susceptible to failure resulting in both the loss of the card and its stored data. Industrial-grade cards also function over wider temperature ranges and have longer life spans than consumer-grade cards.

Data stored on the card can be retrieved either by removing the card and carrying it to a computer or through a communications link with the datalogger. The computer can read the CF card either with the computer’s PCMCIA slot and the CF1 adapter or the computer’s USB port and the 17752 Reader/Writer.

CardConvert is used to convert and save binary data from a CompactFlash card. CardConvert is included in our PC200W, PC400, LoggerNet, and RTDAQ datalogger support software.

Software Requirements

  • LoggerNet version 3.1.3 or later

  • PC400 version 1.2.1 or later

Datalogger Operating System (OS) Requirements

The CR1000 OS must be OS 4 or later. Both the CR1000 and CR3000 need OS 25 or later to read cards with more than 2 GB of storage.


Typical Access Speed

200 to 400 kbits s-1

Memory Configuration

User selectable; ring (default) or fill-and-stop

Power Requirements

12 V supplied through the datalogger’s peripheral port

CF Card Requirements



  • 10.0 x 8.3 x 6.5 cm (4.0 x 3.3 x 2.6 in.)

  • 25.2 x 10.2 x 7.1 cm (9.9 x 4.0 x 2.8 in.) of CR1000 with CFM100 attached


133 g (4.7 oz)

Typical Current Drain

RS-232 Port Active

  • 30 mA (writing to card)

  • 20 mA (reading card)

RS-232 Port Not Active

  • 20 mA (writing to card)

  • 15 mA (reading card)

Low Power Standby

700 to 800 μA



CFM100 CompactFlash Module


CFM100 CompactFlash Module

Technical Papers

CF Card Information (3SM-F)

A Better Way to Write High-Frequency Data to 16 GB and Smaller CF Cards (3SM-G)


CFM100 EU Declaration of Conformity


Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: