Bộ thu thập và xử lý dữ liệu Data Logger 1 cổng CAN BUS ICP DAS CAN-Logger100

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

1-port CAN Bus Data Logger. Compatible with CAN specification 2.0 A and B. Supports SD card and SDHC. Powered by USB and M12 connectors. Includes free utility and software. Supports operating temperatures of -25 ~ 75 ℃(-13F ~ 167F).

Gọi 0904251826 để được trợ giúp

Bộ thu thập và xử lý dữ liệu Data Logger 1 cổng CAN BUS ICP DAS CAN-Logger100

 

Features

The CAN-Logger100 is a high-performance smart CAN bus data logger with one CAN port that can help collect data and process on a CAN bus network easier and quicker. The powerful CPU of the CAN-Logger devices provide the accurately time-stamp for each CAN message and support storage media like SD card or SDHC type flash to save CAN messages, which helps users easily analyze and diagnose the CAN Bus network. Providing great portability, the CAN-Logger100 is powered by USB interface or M12 connectors of CAN bus interface. The CAN-Logger100 device uses the standard USB HID driver of the Windows system.

  • Compatible with CAN specification 2.0 parts A and B

  • 2500 Vrms photocoupler isolation on the CAN side

  • Fully compatible with the ISO 11898-2 standard

  • Supports CAN bus acceptance filter configuration

  • Maximum CAN data flow for a single channel is 15000 fps

  • Programmable CAN bus baud rate from 10 kbps ~ 1Mbps

  • USB 2.0 High Speed Compatibility

  • Supports 4 to 32 GB SDHC type flash to save CAN messages

  • Built-in jumper for the 120 Ω terminal resistor of the CAN side

  • Power by the USB port or CAN port

  • 3 kV galvanic isolation for the CAN port

  • Provides a configuration utility that can be used to transmit/receive CAN messages

Software

  • CAN 2.0A or CAN 2.0B specification selection

  • CAN Bus baud rate and acceptance filter configuration

  • Easy to transmit/receive CAN messages and check CAN Bus state

  • CAN Bus communication mode (normal and silent mode ) configuration

  • Data filter function for logged data

Applications

  • Automobile

  • Control System

  • Building Automation

  • Factory Automation

  • Distributed data acquisition

Specifications

CAN Interface

Transceiver

NXP TJA1042

Channel Number

1

Connector

5-Pin male M12 x 1
(Pin 1: F.G., Pin 2: +Vs, Pin 3: GND, 
Pin 4: CAN_H Pin 5: CAN_L)

Transmission Speed (bps)

10 k, 20 k, 50 k, 100 k, 125 k, 250 k, 500 k, 800 k, 1 M and user-defined baud rate

Terminator Resistor

DIP switch for the 120 Ω terminator resistor

Isolation

3000 VDC for DC-to-DC, 2500 Vrms for photocoupler

Specification

ISO-11898-2, CAN 2.0A and CAN 2.0B

CAN Filter Configuration

Utility tool

USB Interface

Connector

USB Type B x 1

Compatibility

USB 2.0 High Speed

Max. Data flow

Transmit: 4000 fps ; Receive: 1000 fps

Software Driver

Windows 2K/XP/7/8/10

Data Logger Capability

Storage Media

SDHC type flash – support 4 to 32 GB

Recording Format

Binary

Time Stamp

10 us

Configuration

Utility tool

Data Logger

Maximum message rate, receive: 15000 msgs/s

Trigger

Log continuously

LED

Round LED

Power, MS, SD, CAN1, CAN2, CAN_ST LEDs

Power

Power supply

USB power or CAN bus power (Unregulated +10 ~ +30 VDC) delivery

Protection

Power reverse polarity protection, Over-voltage brown-out protection

Power Consumption

0.1 @ 24VDC

Mechanism

Installation

DIN-Rail mount

Casing

Metal

Dimensions

102.0 mm x 102.0 mm x 44.0 mm (W x L x H)

Environment

Operating Temperature

-25 °C ~ +75 °C

Storage Temperature

-30 °C ~ +80 °C

Humidity

10 ~ 90% RH, non-condensing

 

Reference & Support

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: