CAN-2015C CANopen slave module of 8-channel RTD inputs

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ
CAN-2015C CANopen slave module of 8-channel RTD inputs
Gọi 0904251826 để được trợ giúp

CAN-2015C CANopen slave module of 8-channel RTD inputs

 


 

 

CANopen Interface
Connector 5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)
Baud Rate (bps) 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M, selected by rotary switch
Terminator Resistor DIP switch for the 120 Ω terminator resistor
Protocol CANopen CiA 301 ver4.02, CiA 401 ver2.1
Node ID 1~99 selected by rotary switch
NMT Slave
Error Control Node Guarding protocol / Heartbeat Producer
SDOs 1 server, 0 client
PDOs 10 RxPDO, 10 TxPDO (Supports dynamic PDO)
PDO Modes Event-triggered, remotely-requested, synchronous (cyclic), synchronous (acyclic)
Emergency Message Yes
EDS file Yes
Analog Input
Channels 8 channels for 2-wire or 3-wire RTD
Input Type Pt100, Pt1000, Ni120, Cu100, Cu1000, JPt100
Resolution 16-bit
Sampling Rate 10 Samples/Sec. (Total)
Accuracy +/-0.05% FSR
Zero Drift +/- 0.5 μV/ °C
Span Drift +/- 20 ppm/ °C
Common Mode Rejection 150 dB
Normal Mode Rejection 100 dB
Individual Channel Configuration Yes
Open Thermocouple Detection Yes
Over voltage Protection 120 VDC / 110 VAC
Input Impedance 20 MΩ
Isolation 3000 V DC-DC isolation, 3000 Vrms photo-coupler isolation
Hardware
ESD Protection Contact 4 kV class A
LED
LEDs PWR LED, RUN LED, ERR LED, 8 LEDs for the AI high alarms or low alarms
Power
Power Supply Unregulated +10 ~ +30 VDC
Power Consumption 1.5 W
Mechanism
Casing Plastic case, fire-retardant materials (UL94-V0 Level)
Installation DIN-Rail
Dimensions 33 mm x 99 mm x 78 mm ( W x L x H )
Environment
Operating Temp. -25 ~ 75 ℃
Storage Temp. -30 ~ 80 ℃
Humidity 10 ~ 90% RH, non-condensing

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: