Cảm biến phát hiện chuyển động và nhiệt độ kết nối RS-485 Modbus ICP DAS PIR-130-AC

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

Passive Infrared (PIR) 360° Motion and Temperature Sensor Module. DCON and RS-485 Modbus RTU protocol. 110~220 VAC with operating temperature range of -25°C ~ +75°C (-13°F ~ +167°)

Gọi 0904251826 để được trợ giúp

Cảm biến phát hiện chuyển động và nhiệt độ kết nối RS-485 Modbus ICP DAS PIR-130-AC

Features

The PIR-130-AC module has a 1-channel passive infrared (PIR) sensor that detects human-body generated infrared waves within a range of approximately 8 meters in diameter with a 360° coverage area. The PIR-130-AC is for indoor motion detection and can be configured to automatically switch on a light if motion is detected. It also includes a 1-channel temperature sensor that can measure room temperature or be configured to activate a fire alarm.

The device has an RS-485 interface and runs on DCON and Modbus RTU protocols.

  • 360° Motion Detection Up to 8 meter Diameter Range

  • Time-Delay / Lux. / Sensitivity Adjustable

  • Photo Sensor Inside for Smart Switch-on Control

  • LED Indicator for PIR/Temperater Sensor

  • The Temperature Sensor for Measuring Room Temperature or Fire Alarm

  • Relay Output Can be Used to Control the Light Via the PIR/Temperature Sensor

  • Up to 1500 W Incandescent and 300 W Fluorescent (T8) Loading Capability

  • RS-485 Communication Interface

  • DCON and Modbus RTU Protocols

  • Ceiling Surface Mount Design

 

Specifications

CPU Module

Time-delay

Hardware: 8-step Switch-selectable (seconds): 6, 16, 33, 66, 131, 262, 524, 1049
Software: 16-step (seconds): 2, 4, 6, 8, 16, 33, 49, 66, 131, 262, 393, 524, 1049, 2097, 3146, 4194

LUX Control Level

Hardware: 2 mode (Dawn and dust) / Software: 5-step

Detection Range

Distance: 4 meters Max.

Detection Field of View

360° Diameter 8 meters Max.

Temperature Sensor

Measurement Range

-25°C ~ +100°C (-13°F ~ 212°F)

Fire Alarm

65°C (Programmable)

Resolution

0.0625°C

Accuracy

±2°C

Relay Output

Channel

1

Type

Power Relay, Form C

Max. Load Current

NO: 10 A @ 250 VAC
NC: 6 A @ 250 VAC

Load Wattage

Incandescent Bulb: 1500 W Max.; Fluorescent Lamp 300 W Max.

RS-485 Interface

COM Port

RS-485

Transmission Distance (m)

Dependent on Baud Rate. For example, 1200 m Max. at 9600 bps.

Baud Rate (bps)

1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200

Protocol

DCON, Modbus RTU

Node Address

Hardware: 160 ~ 191 / Software: 1 ~ 255

LED Indicators

LED Indicators

Yes,1 as Power/Communication Indicator. 1 as Alarm Indicator.

EMS Protection

ESD (IEC 61000-4-2)

±4 kV Contact for each Terminal, ±8 kV Air for Random Point

EFT (IEC 61000-4-4)

±4 kV for Power Line

Power Requirments

Power Supply

110 ~ 220 VAC

Protection

Power reverse polarity protection, Over-voltage brown-out protection

Power Consumption

2 W

Mechanical

Installation

Ceiling mounting

Protection Class

IP20

Dimension (D x H)

Ø 121 mm x 52 mm

Environmental

Operating Temperature

-25°C ~ +75°C (-13°F ~ +167°F)

Storage Temperature

-30°C ~ +80°C (-22°F ~ +176°F)

Humidity

10 to 90% RH, Non-condensing

Reference & Support

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: