Cảm biến đo ứng suất đáy móng Geokon 4855

Thương hiệu: Geokon | Tình trạng: Còn hàng
Liên hệ

Pile Tip Type (VW) | Model 4855

Gọi 0904251826 để được trợ giúp

Cảm biến đo ứng suất đáy móng Geokon 4855

The Model 4855 Pile Tip Pressure Cell is used to measure pile-tip loads in cast-in-place concrete piles (caissons). Like the Model 4810, the Pile Tip Pressure Cell has a thick upper plate. The cell is manufactured to be close to the diameter of the pile and the back plate is supplied with hooks or sections of rebar to allow the cell to be connected to the bottom of the reinforcement cage. A vibrating wire pressure transducer is connected to the cell to provide some redundancy in the event that one transducer is damaged during installation. An added feature is a remote re-pressurization mechanism to allow the cell to be inflated slightly so as to ensure good contact between the cell and the surrounding concrete.


Standard Ranges¹ 2, 3, 5, 7.5, 10, 20 MPa

Over Range 150% F.S. (maximum)

Resolution 0.025% F.S.

Accuracy² ±0.1% F.S.

Temperature Range¹ −20°C to +80°C

Height × Diameter¹ 50 × 600 mm

¹Other ranges and sizes available on request.

²Transducer accuracy established under laboratory conditions. 
 Total system accuracy (pressure transducer + pressure cell) is subject to site-specific variables.

*Please Note: Models are also available (3500 Series) with semiconductor pressure transducers to enable measurement of dynamic pressures (please contact GEKOKN, INCORPORATED for details).

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: